Thursday, July 27, 2006

Custom Cross bike #7: Jim's Strong


Another sweet orange custom cyclocross bike for the Custom Gallery. This is the first Strong frame though. Check it out.

Frame: Custom Steel, S3 front triangle with a Focco rear.

Headset: CK

Fork: Alpha Q

Stem: Bontrager

Bars: Ritchey

Seatpost: Easton EC 90

Saddle: SLR

Brakes: Pauls neo front, Touring rear

Wheels: Ksyrium SSC

Tires: Vittoria Open Pave EVO CX

Cranks: FSA SLK

Pedals: Frogs

Drivetrain: Ultegra shifters and front derailleur, DA rear derailleur, cassette and chain, 9 speed.

Jim says, "My Strong is mostly my commuter/fun bike. But she does get knobbies and gets to play. It comes in at a hair over 18 lbs"

Pretty nice bike for a commuter bike Jim. Thanks for the rig!

If you have a handbuilt/custom cross bike, send it in to me (there's no weight restrictions) at plusonelap@gmail.com

Wednesday, July 26, 2006

I need a job in Portland Oregon



Heya readers. Im moving to Portland in two weeks and am looking for employment. Hoping one of my faithful readers might be someone or know someone that can get me a job.

If you like the site, and think I might be a good match with your corporation email me or give me a call and we'll chat. Any offers welcomed, truly. From working in a bike shop to an Engineering office in Tigard or wherever. Email me at plusonelap@gmail.com Click "more..." to see my resume posted below.




Jeremy Nicholas Burlingame
email: plusonelap@gmail.com phone: 916 201 8939

New challenges are embraced in all aspects of my life and are viewed as opportunities for both new success and growth. With the opportunity, I am a valuable addition to any team through my reliability, intelligence and goal driven personality. I am moving to Portland to get a degree in Engineering at Portland State University.

Employment Experience

April 2003- January 2006 InAlliance, Sacramento, Ca
Supervising Case Manager
Supervising a team of approximately 10-15 direct care staff whom work with developmentally disabled adults that are living in their own homes. Involved with all aspects of supervision including: hiring and interviewing, training and supervision, billing as well as termination. Also work with clients at meeting and establishing their
ISP and IPP goals and as a liaison to ALTA regional center.

October 2000-June 2001 ACES Counseling, Eugene OR
Alcohol and Drug Counselor
Facilitated groups of 20-30 DUI offenders aimed at changing problematic addictions or behaviors through the use of education as well as group support. Also performed a minimum of three assessments weekly of new clients based upon DSM-IV criteria to determine levels of addiction or substance abuse.

April 1998-October 2000 Central Valley Autism Project, Clarksburg, CA
Lovaas Trained Behavioral Autism Tutor
Tutored a four year old autistic boy using behavioral intervention methods developed by Dr. Lovaas of UCLA. This was a direct care service position which included bimonthly trainings on behavioral modification skills and drills to use as well as attendance of the
Autism Conference.

June 1997-September 1997 CA Department of Rehabilitation, Sacramento CA
Behavioral analyst JTPA program
Internship through the Department of Rehabilitation in the summer of 1997, working with therapists in an enclave setting with adults with developmental disabilities to determine their eligibility to work on their own and ability to maintain a paid job.

Education

1996–2000 University of California at Davis
B.A., Psychology, minor in Sport Psychology
Dean's Honor List

Other Certifications and skills
P.A.R.T. Trained
C.P.I. trained
First Aid /CPR certified

Tuesday, July 25, 2006

Aluminum makes a bad axle



To all those dropping weight I wouldnt recommend using an axle made of aluminum. As seen in this Weight Weenie post.



Stick to titanium as a good lightweight axle material for your bottom bracket.

Friday, July 21, 2006

Ebay Cyclocross


Update: Thanks folks, all the stuff is sold. I got $710 for my frame and fork, which I think is a decent price for both myself and the buyer.

If youre looking for some good prices on some cross stuff, check out these Ebay bargains.

The first is my Tricross frame and Alpha Q fork, my move to Portland and lack of finances is forcing the sell. Link.

The second is my buddy, Josh's, Rocklobster, as in the #4 bike on the Plus One Lap Gallery, Rocklobster. He gets a new bike every year, so pick this one up. note: If you buy this and build it up into a lightweight cross bike, you can still send it in the +1lap to be added to the lightweight gallery. Link.


Third, is my set of Triple ti Eggbeater pedals. Link.

Last, is my set of Stronglight Pulsions. 175mm, ISIS, 130 bcd. Link.


Thursday, July 13, 2006

Sucker Brook Cross in NH

Another race added to the Plus One Lap Race List. This is the Sucker Brooks cross in New Hampshire.

Plus One Lap is the source for your 2006 cyclocross calendar.

Monday, July 10, 2006

Lightweight Cross Bike #16: Pete's Ridley



Another really cool lightweight Cross machine is Pete’s Ridley Supercross. A good choice of lightweight parts that are still durable. Check it out!







Here's the specs on my Ridley. I don't have individual weights, onlythe cumulative weight.
Frame: Ridley Supercross, 54cm
Fork: 4ZA Python Carbon
Bars: FSA RD2000Stem: FSA 115, 120mm
Headset: FSA Integrated
Brake Levers: Campy Record
Brakes: Spooky Carbon
Seat Post: FSA SL K Zero Setback
Saddle: Selle Italia SLR
Crank Set: FSA Carbon Pro Compact
Chain Rings: Salsa 110 mm X 40T
Bottom Bracket: FSA Pro Ti
Pedals: Crank Brothers Ti, 1st Generation
Chain: Record
Rear Derailleur: Campy Chorus
Cassette: Campy Chorus
Hubs Frt & Rr: DT 240s 28 hole
Rims Frt & Rr: DT RR 1.1Spokes: DT Revolutions
Tires: Michelin MudsTubes: Michelin
Rim Strips: Velox
Bar Tape: Cinelli
Cables: Campy

The total weight on my Fish Scale is: 16.62 lbs. Since the photos, I've added a chain guard. The next big item is a new wheelset. Most likely DT hubs with Zipp 285 Pave Rims and Gommitalia tires.



Saturday, July 08, 2006

A light Rocklobster in production...



Greg's having Paul Sadoff of Rocklobster build him a GX2 Scandium cross frame. Greg sent me some photos of the frame pre-paint. I expect that this will be another dual gallery bike like Josh's Rock lobster. As Greg says, " I'll send you more pictures as it is painted and built but the build kit will be FSA carbon cranks, FSA 488 carbon tubular wheels, dura ace and other chi-chi. Lust."

The plan is to paint this rig black, with some white highlights in the saddle and bar tape. When the frame comes back from the painters, I'll be posting some pictures of it.



Monday, July 03, 2006

More Cantilever brake setup help




I've posted about this before, but I think its important. Cantilever brakes get a bad rap because people dont know how to set them up. And dont think that taking your bike to your LBS will solve all of your problems----just learn how to do it yourself.

Again, I went to the internet archive and found this series of articles from Keith Bontrager.

Link.

Edit: in case the link isnt working, I saved the info and posted it verbatim here (without pictures):

Unfortunately the pics arent loading, but the information is still good, just long winded. Read some and then come back.



The Background
(How did this happen?)
Cantilever brakes used to come with these nice, simple straddle wire carriers. These disconnected quickly to let you get the wheel in and out, and held the cable in a way that let you adjust the relationship between the straddle wire, brake arms and main brake cable independently. Riders who understood them liked them.
They also took a little time to set up right. Bike manufacturers, who have to pay people to assemble bicycles by the hour, did not like them.
There was also a darker side to this. The straddle carriers let the straddle wire disengage from the carrier and fall into the tire if something really weird happened while you were riding, like if you let the main cable degrade too much and it broke, or if you were really sloppy and didn't hook the wire up right when you put the wheel on. The straddle wire got caught in the knobs and the rider got to do a Superman impression sometimes. Some lawyer's (those who worked for manufacturers) didn't like this and wanted an idiot proof system. Other's (guess who) liked it just fine and probably made their Mercedes payments with their fat cuts of the legal settlements. An individual's position depends on which side of the courtroom they sat in I guess.

The new parts.
Shimano to the rescue. Shimano came out with straddle wires and carriers that fixed the distance between the carrier and brake arm. Easy to install, no adjustment necessary, none possible, and not much hope of getting any braking power if the thing wasn't set up with the right parts from the beginning. Sure, you could buy a bunch of different straddle wire lengths, so you could get the brake dialed, in principal. But, somehow, this never seemed to happen with standard bikes. Rider's who knew the old systems just changed a few parts and the brakes worked for them again. Riders who didn't were pissed off about their brakes.
The old systems were not doomed. There were a few ways around the rider's problems using old standard parts. First, you could just pay a little attention to the condition of the parts, hook them up right, and risk the occasional weirdness on the trail. The risk is very, very small. Cables don't just jump out of the carriers with everything set up reasonably well. Good for riders with mechanical skills - not good for the manufacturers lawyers.
Or you could hang a piece of safety wire off the stem or fork brace and loop it under the straddle wire. If anything broke, the wire caught the straddle cable before it hit the tire. You only really had to worry about the cable falling into the front wheel - a skidding rear wheel isn't fatal very often. 1 This wasn't very pretty, but it worked like a charm (Mark Michel at the Bike Trip in Santa Cruz showed me this one first).
The next easiest solution was to get a new straddle carrier design so the straddle wire is captured in use but still adjustable. You could bend a tab gently with some pliers on a stocker, or go for a $20 CNC anodized after market carrier that would do about the same thing. I don't know much about these, and I would never give gold for this sort of thing when pliers and safety wire would do the job. I'm weird that way.
I'm always working on brakes. I calculate the mechanical advantage of the system, just to see what's going on. I am always playing with designs. The mechanical advantage of one of these brakes is not the same as measuring the distance from pivot to pad and pivot to cable attachment (the ratio most punters refer to when they talk about braking leverage - a very misleading thing to do). The best way to do the calculation is to figure out how far he pad moves toward the rim for a given increment of main cable travel. This is the mechanical leverage for the system, excluding the lever. This ratio changes as the parts in the system move, so it's not a hand calculator job, though that would do in a pinch. It's best to do it on a spreadsheet. There are a couple around here somewhere so you can get an idea of what they look like.
From this analytical stuff you can see the effects of changes in the geometry of the system - pivot locations, cable lengths and angles, all the stuff you would need to know if you wanted to design good brakes or set up the ones you have the way you want. The spreadsheets show you details like how far the pad moves vertically (not a problem if you set the brakes up right) and horizontally, where the straddle wire and arms should be, etc. Fun stuff. Not as much fun as spending a lot of money on new parts, or a few other things I can think of, but still pretty fun.
Click here to see how it's done
(1) If you are going to look for somebody else to blame and then sue them when things go wrong for you, use the safety wire on both wheels.

V Brakes - the best brake in the universe!
According to the magazine headlines anyway.
So they are the latest craze. Despite what the glossies say, the same rags that make their living off of trends like this, both in ad revenue and reader interest, you really don't need them (in a basic, practical sense, like you need food and warmth). But the hypemeisters went off on them, in their own special high powered way, clearing the way to warp speed commerce, without much knowledge or riding time to back it up of course, so the frenzy is being force fed and you are the (often willing) target. You need these brakes! Ante up, be trendy, ride the latest.
What if you did get some? What happens next? One, you have to work overtime for a month to pay off the bill. Two, you wear out tires from skidding a lot until you get a light touch. Two and a half, maybe you check out the soil with a face plant or two - the brakes stop hard. More?
Turns out that there are a few more ahhh� complications. The number and location of unsealed pivots on the brakes, while not a fatal defect, definitely create a new, annoying maintenance chore you probably won't look after until it's way too late. Unsealed bearings in a harsh environment are not a clever idea. Ask Herr Leitner. Need some spare parts to keep the things going a few years from now? Right. Maybe it's better to upgrade to next year's model. Bike parts could be sold like software, where the big hook is regular upgrades.
This is not Shimano's fault. The brakes work well enough. They do the job they were intended to do; they just have a short fuse. No one said otherwise. The designs will change and change again, on a two year cycle, until the brakes are dialed and everybody who could possibly want some get some. If you don't like throwaway brakes, bitch loud and stop paying for the stuff. Otherwise, caveat emptor, eh?
You might think this is a drag. On the other hand, you might think this is good for you and the sport, I guess, since, among other things, it gives you another opportunity to have some respect for the differences between new designs and mature ones. And the worn out brakes can go in the recycling bin along with the derailleurs, shifters, and frame when they all wear out, maybe even at the same time. At the $0.25/lb you get over the hill, that's about $1.25 in scrap value. Vast excess in modern consumption habits drive the industrial world's economies right? We don't want to mess with that.
None of this will be a choice for you if you are in the market for a new bike. You are going to get these things on bikes next year, ours along with everybody else's. Retailers were clear on this point. They would not order bikes without the new brakes on them. They would not be able to sell them. We'd starve if we swam upstream on this one, and, while we don't mind a good hard against-the-grain dog paddle now and then, we're not always that stupid (you may disagree about this, but it works for my point in this case).
Poor (?) Shimano didn't realize they were creating such a monster demand for the brake. They can't keep up. To their credit they probably weren't planning to make that many in the first place since the brake is fundamentally designed to solve the cable routing hassles you have when you try to set up a standard cantilever brake on the back of a bike with a swing arm. The poor marketing department missed it when they listened to the engineers the first time around; marketing folks should never listen to engineers. But they pounced when they heard the clawing at the door. Who could have guessed that the brakes would be the meeee tooooo meeee toooooo aftermarket part of the year.
Back to the positive side. I like V brakes for their intended application. They solve cable routing problems on full suspension bikes. V brakes let a frame designer install a rear brake on a bike without cable stops on the rear triangle (or whatever shape it's become these days). That's it, the basic idea.
To do this, Shimano had to extend the arms above the tire. There aren't many other ways to do it (there are a few but they add even more moving widgets in all the wrong places). Then they had to turn down the leverage or they would maim too many bike part buying riders. The future of the sport, and their revenue, would go in the tank. I know, I know, there are those who can ride the brakes connected to standard levers. I've tried it. I think they are really just being brave buckaroos, going for a merit badge and not really dialing in their brakes. That's fine, let them.
What else is good about V brakes? Not that much. They're dressed up with a new pad so the after market brake pad folks have to chase a moving target. The new pads add some rigidity to the system, (the combination of a thin pad and firm compound isn't as compressible) but it's a small effect. The pads don't seem to wear much longer than old style pads in our experience. Maybe not as long, but I have no measurements yet.
The 4 bar lever system Shimano devised to make the pad move in a flat trajectory towards the rim is icing on the cake. And, as is often the case with frilly toppings, the brake would probably be better if it were left off. I can't see the value in this one, and the downside is clear. (If you are dying for a V-brake check out the LX units for a simpler, possibly more durable design). Oh yeah, the pads don't quite move out of the way when the brake is released in a lot of cases, so the tire has do get hand hammered through the gap when the brakes are retracted, in order to get the wheel out. This is admittedly a tough part of design, compatibility with surrounding components. Details, details.
Technical innovation? Maybe. Smart marketing? In hindsight, probably. Good brakes? Depends on your goals and your means, certainly not overwhelmingly better. Do I have a bad attitude about this sort of thing? Clearly.
I've thought about this before. Believe it or not, I designed brakes like this 8 years ago. The FS bike Paul Turner and I hacked together for Kestrel back then (The Nitro) had brakes like this on it. Others have figured it out along the way too. I didn't design in the 4 bar linkage food because I thought it was unnecessary, maybe stupid. There was also a huge problem with matching the brakes with a new brake lever standard, and I was in no position to take on the chore of convincing the knobby universe that they needed a new lever standard that took up more cable when you pulled them. My design was put to rest because of the lever problem and because there weren't many FS bikes around back then that needed them, and that is what the design was for in the first place.

Bontrager SPEED-B-GONZ - circa 1986? - all parts made by Laura
Besides, I knew that the rest of the world could get good leverage out of standard cantilevers if they wanted it (and it's not clear to me that this is a huge improvement in a bike's performance). You just have to dial them in right. No one would be silly and buy an expensive brake if there was no clear advantage to it.

700c Speed-B-GONZ version (borrowing heavily from Mafac design).
What was that???
First of all, I was wrong again. Predicting a charge for the cliffs by the masses is a psychological puzzle, not an engineering exercise. Not my forte.
Second, standard cantilever brakes really can be dialed in to perform as well. The magazines forgot to mention this, but then, disclosure of technical information really isn't their mission is it.
So the appropriate question now is, what if you didn't get some? Could you have trick brakes somehow anyway? Step right up. For less than $10 invested in some old style parts you can match the stopping power of the V brake with most cantilevers, even the cheapo STX units. You won't have to throw away your current, expensive shifter/brake lever combos just to feel what it's like to ride with brakes that have a high mechanical advantage. You may find you don't like it that much anyway. You won't have to survive by eating kidnapped pets for dinner just because you spent all your money on brakes that can send you over the bars with one finger. You can even get an edge by letting those lemmings that have been sucked in know just how much money they wasted.
Retro? Maybe. Depends on what you mean by that. Bad attitude? (As in, How can we keep this industry snowballing if you're going to be so damned practical?) Yep. Not my problem. Useful information? Yes. I ride with tricked out cantilevers. (Except the Pissing Dog prototypes, duly equipped with V Brakes and other prototypes). We don't sell anything I recommend in this document.
The LARGE PRINT giveth and the small print taketh away ( a line stolen from Tom Waits who probably stole it from someone else)
It's not all blue sky. The downside of the modifications (neatly arranged in more cool bullet points)�
• It costs $10 or so for the parts.
• You have to know what you are doing to do it right.
• The parts may be hard to find so you'll have to find a shop where they keep obsolete inventory around in order to score some of them.
• The straddle wire ends up about the same distance from the tire as the bottom side of the fork brace, closer than it is with the stock parts. It might catch a mud or twigs occasionally, but not very often in my experience, and not enough to slow you down.
• The leverage in the modified cantilever brakes is more sensitive to small changes in the set up due to wear. As the pads wear the system loses a little leverage. You'll have to maintain the brakes, especially the overall cable and pad adjustment, to keep the leverage high.
The last bit isn't unique to cantilevers. Brakes require adjustment. It's no big deal - a fact of life. V brakes chew through pads with the best of them. They just don't go through much of a change in leverage as they wear. You have to adjust the pads in the cantilever brake back to the original settings every now and then, instead of just cranking out the adjuster barrel on the lever all the time to keep them strong.
There may be a way out of this someday. If the guys hawking disc brakes ever figure out how to con the magazines into a good, relentless, fully hyped up rave about them, there may be less maintenance intensive brakes in the future. Maybe it would get launched if Shimano came up with one, so there's some serious horsepower and big ad money behind it? In the meantime there are a lot of other technical hassles to work out with discs; it's definitely not their time yet for most riders. We're stuck with having to know what to do and how to do it with inexpensive, easy to maintain, good performing, boring, practical parts. Bad news, eh? Sorry.
There is a way you can get around all of this if you are stuck with old style, out of date, out of fashion, not really up to the task anymore seemingly, cantilever brakes. Really. You have to replace a few nickel and dime parts that the lawyers made obsolete years ago, set them up right, and away you go, errr� stop.



Sunday, July 02, 2006

Custom Cross #6: Jeromy's Bontrager



Jeromy's got a vintage handbuilt Bontrager CX ride to be added to the handbuilt gallery. This bike looks cool, mainly because it looks like it gets ridden.





The specs are:
Frame: Bontrager
Fork: Steelman
Cranks: Shimano
Stem: Salsa
Bars: Salsa Bell Laps
Saddle: WTB
Pedals: Shimano

Jeromy said:
"I'll be stoked to see my bike there once posted. I'll be adding in the near future a threadless king headset along with a fork and stem, probably pauls brakes, we'll see. Right now, the bike is great and really doesn't need upgrading, just on the decents with the old style headset the fork chatter could be eliminated with a king threadless headset for sure. But it's pretty cool vintage 1" quill, don't you think?"

I've always had a thing for those Salsa stems. Cool looking ride.

If you have a handbuilt cyclocross bike email it to me at plusonelap@gmail.com